- Home
- Products
- Polyester Lace Trim
- Narrow Ladder Guipure Lace Insertion Trim
Product reference · DG1196
Narrow Ladder Guipure Lace Insertion Trim
Starting quote
USD 0.28per yard
Minimum order: 2,000 yards per design and colour
Made to order
This product reference is included automatically when you open the inquiry form.
- Width
- 1 cm
- Material / composition
- 100% polyester
A 1 cm polyester guipure insertion trim with two fine parallel edges joined by diagonal openwork. Its small scale creates a clean decorative line for blouse details, seam insertions and lightweight fabric accessories.
- Product reference
- DG1196
- Construction
- Water-soluble guipure embroidery
- Stretch
- Non-stretch
- Colour
- White photographed; custom colours available
- Typical sampling
- Typically 2–3 days; confirmed for the selected project
- Typical bulk production
- Typically 15–20 days; confirmed for design, colour, quantity and sample approval
- Starting unit quote
- USD 0.28 / yard
- Minimum order
- 2,000 yards · per design and colour
Minimum order: 2,000 yards per design and colour. Starting unit quote for the listed specification and minimum quantity. Confirm colour, finishing and final order terms with our team. Shipping is quoted separately.
Shipping, supply & after-sales
Availability to confirm Stock has not yet been confirmed for this listing. Confirm the product reference, specification, quantity and dispatch schedule with our team before payment. A listing or price does not reserve stock.
Order preparation time Preparation time is agreed per order in working days. It starts only after the specifications, quantity and dispatch schedule are agreed and the agreed payment is received, and ends when the goods are ready for handover to the carrier. International transit is not included.
Shipping method, destination, freight and trade terms are confirmed for each order. Unless expressly included in the written quotation, product prices exclude international freight, insurance, import duties, destination taxes and local charges.
Conforming commercial goods are not returnable for a change of mind. Incorrect goods, shortages and nonconformity are handled under our returns & quality policy.
On this page
A fine ladder line rather than a deep border

DG1196 is the narrowest trim in this batch. Two straight edge cords are connected by a repeating diagonal openwork line. There are no large flowers, medallions or deep scallops, so the detail reads as a fine strip when it is used on a complete garment.
The 1 cm overall width leaves little room to hide a wide attachment seam. Decide how much of the edges will be sewn down and how much of the open centre should remain visible. The photographs show the trim loose and draped; those bends illustrate its appearance, not elastic recovery. The material is 100% polyester and non-stretch.
Where this trim works
A narrow join in a blouse panel
Use a straight length between two small fabric panels when a broad lace insertion would dominate the design. Make a short trial join first and measure the finished opening after both edges are attached. The overall trim width and the visible open line will be different once the seam covers the borders.
Parallel lines beside a placket or pocket
Apply the trim to a solid panel as a fine ladder accent. Mark both lines before sewing a symmetrical pair, and check their spacing against the finished placket or pocket rather than the raw fabric edge. Let the loose ends run into an existing construction seam where possible.
A restrained detail on textile accessories
On a fabric pouch or small linen item, a single line can add openwork without introducing a floral motif. Use a contrasting backing in the sampling stage if you need to see whether the narrow openings remain distinct after stitching.


Test the visible width, not just the loose width
- Cut a short trial length and place it between the actual fabric pieces.
- Mark the attachment lines on the two edge cords, keeping the diagonal centre clear.
- Sew the trial seam without pulling the non-stretch trim to fit a shorter fabric edge.
- Measure the visible opening and inspect the reverse; record that finished sample as the construction reference for the order.
Choosing between the designs
Choose DG1196 for a fine, straight openwork line. DG782 offers a wider crossed lattice, and DG1199 adds round embroidered dots along the sides when a more decorative outline is wanted.
Specifications and buying terms
| Attribute | Value |
|---|---|
| Product reference | DG1196 |
| Material / composition | 100% polyester |
| Construction | Water-soluble guipure embroidery |
| Width | 1 cm |
| Stretch | Non-stretch |
| Colour | White photographed; custom colours available |
| Typical sampling | Typically 2–3 days; confirmed for the selected project |
| Typical bulk production | Typically 15–20 days; confirmed for design, colour, quantity and sample approval |
| Starting unit quote | USD 0.28 / yard |
| Minimum order | 2,000 yards · per design and colour |
Samples, colours and order planning
If you want an open ladder seam, send a close sketch of the join and specify which part of the 1 cm band must remain visible. For an applied line, include the backing colour; it changes how clearly the diagonal openings can be seen.
See the starting unit quote shown for this design. Shipping is quoted separately. Confirm the selected colour, quantity, sample requirements and applicable trade terms for your order.
The displayed minimum order applies per design and colour. Send the product reference, colour reference, intended quantity and delivery country so that the quotation can address the actual order.
Sampling typically takes 2–3 days and bulk production typically takes 15–20 days. The schedule is confirmed for the design, colour, quantity and sample-approval requirements of your order.
Samples are available. Shipping is charged to you; sample arrangements and any sample charge are confirmed before dispatch.
Before ordering
What is the minimum order?
The displayed minimum order applies per design and colour. Include each reference and colour separately in your quantity list.
Can I request a custom colour?
Yes. Send a physical colour reference or the agreed colour standard. Approve the colour together with the selected trim and intended backing before bulk production.
How do I request the right sample?
Send the product reference, colour, intended placement and the fabric to be used. Allow enough length to sew the complete trial join or cuff. Sampling is typically 2–3 days, with timing and charges confirmed for your project; shipping is charged.













