- Home
- Products
- Polyester Lace Trim
- Dot-Edge Guipure Lace Trim
Product reference · DG1199
Dot-Edge Guipure Lace Trim
Starting quote
USD 0.75per yard
Minimum order: 2,000 yards per design and colour
Made to order
This product reference is included automatically when you open the inquiry form.
- Width
- 2 cm
- Material / composition
- 100% polyester
A 2 cm polyester guipure trim with small round embroidered dots along both sides and an open diamond lattice through the centre. The balanced border suits blouse cuffs, garment panel accents and small textile finishes.
- Product reference
- DG1199
- Construction
- Water-soluble guipure embroidery
- Stretch
- Non-stretch
- Colour
- White photographed; custom colours available
- Typical sampling
- Typically 2–3 days; confirmed for the selected project
- Typical bulk production
- Typically 15–20 days; confirmed for design, colour, quantity and sample approval
- Starting unit quote
- USD 0.75 / yard
- Minimum order
- 2,000 yards · per design and colour
Minimum order: 2,000 yards per design and colour. Starting unit quote for the listed specification and minimum quantity. Confirm colour, finishing and final order terms with our team. Shipping is quoted separately.
Shipping, supply & after-sales
Availability to confirm Stock has not yet been confirmed for this listing. Confirm the product reference, specification, quantity and dispatch schedule with our team before payment. A listing or price does not reserve stock.
Order preparation time Preparation time is agreed per order in working days. It starts only after the specifications, quantity and dispatch schedule are agreed and the agreed payment is received, and ends when the goods are ready for handover to the carrier. International transit is not included.
Shipping method, destination, freight and trade terms are confirmed for each order. Unless expressly included in the written quotation, product prices exclude international freight, insurance, import duties, destination taxes and local charges.
Conforming commercial goods are not returnable for a change of mind. Incorrect goods, shortages and nonconformity are handled under our returns & quality policy.
On this page
Round embroidered dots, with open space between them

The two sides of DG1199 are formed by small round embroidered motifs. Diagonal links create an open diamond centre between them. The circles give the border a dotted outline; they are part of the embroidery, rather than separate beads or an added pom-pom fringe.
At 2 cm overall width, this is a compact decorative band. The white photographs show how much of the design comes from the contrast between filled circles and open connections. A plain backing brings out the dots, while an insertion leaves the central lattice visible. This reference is 100% polyester and non-stretch.
Where this trim works
A dotted line around a blouse cuff
Place the trim so that the round motifs remain visible on the face of the cuff. Sample the attachment line before covering the border with a seam or binding. At the cuff closure, compare the end positions of the dots so that the join does not look like a broken circle.
A small garment-panel insertion
Use the band between two straight fabric edges for a dotted openwork stripe. Decide whether the complete side circles should remain outside the fabric or partly overlap it; that choice changes both the visible width and the outline of the finished seam.
A decorative border on fabric accessories
On a pouch or a plain linen panel, the two dotted edges can frame a narrow accent line. Where several pieces belong to a matching set, approve the end join and the backing colour together so that every piece presents the circles in the same way.


Use the dots to plan the beginning and end of a run
- Set the trim on the intended backing and select the attachment line without hiding the main round motifs.
- Mark the visible start and end of the run against the dot sequence before cutting.
- Make one complete cuff or panel join, including any closure or corner.
- Inspect the circles, central lattice and reverse after the intended care process, then keep the finished sample with the approved colour reference.
Choosing between the designs
DG1199 gives a dotted edge on both sides. DG1196 is the finer ladder option, while DG786 carries a leaf vine when a botanical centre is preferred.
Specifications and buying terms
| Attribute | Value |
|---|---|
| Product reference | DG1199 |
| Material / composition | 100% polyester |
| Construction | Water-soluble guipure embroidery |
| Width | 2 cm |
| Stretch | Non-stretch |
| Colour | White photographed; custom colours available |
| Typical sampling | Typically 2–3 days; confirmed for the selected project |
| Typical bulk production | Typically 15–20 days; confirmed for design, colour, quantity and sample approval |
| Starting unit quote | USD 0.75 / yard |
| Minimum order | 2,000 yards · per design and colour |
Samples, colours and order planning
For a cuff or small accessory, send its finished outline and mark the visible joins. If a particular dot alignment matters, show it in a close photograph of the sample rather than describing the requirement only as 'same length'.
See the starting unit quote shown for this design. Shipping is quoted separately. Confirm the selected colour, quantity, sample requirements and applicable trade terms for your order.
The displayed minimum order applies per design and colour. Send the product reference, colour reference, intended quantity and delivery country so that the quotation can address the actual order.
Sampling typically takes 2–3 days and bulk production typically takes 15–20 days. The schedule is confirmed for the design, colour, quantity and sample-approval requirements of your order.
Samples are available. Shipping is charged to you; sample arrangements and any sample charge are confirmed before dispatch.
Before ordering
What is the minimum order?
The displayed minimum order applies per design and colour. Include each reference and colour separately in your quantity list.
Can I request a custom colour?
Yes. Send a physical colour reference or the agreed colour standard. Approve the colour together with the selected trim and intended backing before bulk production.
How do I request the right sample?
Send the product reference, colour, intended placement and the fabric to be used. Allow enough length to sew the complete trial join or cuff. Sampling is typically 2–3 days, with timing and charges confirmed for your project; shipping is charged.













