- Home
- Products
- Polyester Lace Trim
- Leaf Vine Guipure Lace Trim
Product reference · DG786
Leaf Vine Guipure Lace Trim
Starting quote
USD 0.85per yard
Minimum order: 2,000 yards per design and colour
Made to order
This product reference is included automatically when you open the inquiry form.
- Width
- 3.2 cm
- Material / composition
- 100% polyester
A 3.2 cm non-stretch polyester guipure trim with alternating leaf shapes linked along a flowing vine. Its narrow mesh band and small looped edges add a botanical detail to blouse panels, cuffs and fabric accessories.
- Product reference
- DG786
- Construction
- Water-soluble guipure embroidery
- Stretch
- Non-stretch
- Colour
- White photographed; custom colours available
- Typical sampling
- Typically 2–3 days; confirmed for the selected project
- Typical bulk production
- Typically 15–20 days; confirmed for design, colour, quantity and sample approval
- Starting unit quote
- USD 0.85 / yard
- Minimum order
- 2,000 yards · per design and colour
Minimum order: 2,000 yards per design and colour. Starting unit quote for the listed specification and minimum quantity. Confirm colour, finishing and final order terms with our team. Shipping is quoted separately.
Shipping, supply & after-sales
Availability to confirm Stock has not yet been confirmed for this listing. Confirm the product reference, specification, quantity and dispatch schedule with our team before payment. A listing or price does not reserve stock.
Order preparation time Preparation time is agreed per order in working days. It starts only after the specifications, quantity and dispatch schedule are agreed and the agreed payment is received, and ends when the goods are ready for handover to the carrier. International transit is not included.
Shipping method, destination, freight and trade terms are confirmed for each order. Unless expressly included in the written quotation, product prices exclude international freight, insurance, import duties, destination taxes and local charges.
Conforming commercial goods are not returnable for a change of mind. Incorrect goods, shortages and nonconformity are handled under our returns & quality policy.
On this page
A leaf vine that runs along the length of the trim

DG786 places small filled leaf shapes inside a continuous mesh band. Curved connecting lines move from one leaf to the next, so the design has a clear lengthwise flow. Small looped edges frame the vine without the deep scallop of a fan-shaped border.
The leaves remain the strongest part of the white sample when it is viewed from a distance. Close photographs show the lighter net-like connections around them. Use that contrast deliberately: a plain backing emphasises the leaf shapes, while an open insertion shows more of the surrounding mesh. The trim is 100% polyester and non-stretch.
Where this trim works
Paired blouse cuffs
Use the vine as a line around a cuff or along the cuff seam. Before cutting the second cuff, compare the direction of the leaves on both pieces. A matched pair should be planned from the face of the garment, rather than assuming two equal lengths will automatically look the same.
A botanical strip through a blouse yoke
Set the band into a straight yoke seam or apply it to a solid yoke. Check the chosen fabric through the mesh: a very busy print can hide the leaves, while a plain panel gives the vine more definition. Make the sample with the actual backing rather than choosing from the loose trim alone.
Fabric bags and small textile accessories
Run a single leaf band along a pocket edge or across a fabric pouch. Keep the trim clear of the final cutting line and place the end joins inside the construction seam, so the vine stops in a deliberate position instead of ending halfway across the visible panel.


Keep the vine direction consistent across a set
- Choose which way the leaves will run on the finished item and mark the face and direction on the approved sample.
- Lay out paired or repeated components together before cutting; compare leaf positions at the centre and at any visible join.
- Sew a trial length to the selected fabric, allowing for the portion covered by the attachment seam.
- Inspect the front, reverse and joined ends after the intended care process before approving the production construction.
Choosing between the designs
DG786 is the botanical option in this selection. DG782 uses a cross-lattice without leaves; DG1199 replaces the vine with small round motifs and an open diamond centre.
Specifications and buying terms
| Attribute | Value |
|---|---|
| Product reference | DG786 |
| Material / composition | 100% polyester |
| Construction | Water-soluble guipure embroidery |
| Width | 3.2 cm |
| Stretch | Non-stretch |
| Colour | White photographed; custom colours available |
| Typical sampling | Typically 2–3 days; confirmed for the selected project |
| Typical bulk production | Typically 15–20 days; confirmed for design, colour, quantity and sample approval |
| Starting unit quote | USD 0.85 / yard |
| Minimum order | 2,000 yards · per design and colour |
Samples, colours and order planning
For matching cuffs, send the finished cuff circumference, closure position and a photograph of the intended fabric. A complete sample cuff is more useful than a straight swatch when the vine must meet neatly at a closure.
See the starting unit quote shown for this design. Shipping is quoted separately. Confirm the selected colour, quantity, sample requirements and applicable trade terms for your order.
The displayed minimum order applies per design and colour. Send the product reference, colour reference, intended quantity and delivery country so that the quotation can address the actual order.
Sampling typically takes 2–3 days and bulk production typically takes 15–20 days. The schedule is confirmed for the design, colour, quantity and sample-approval requirements of your order.
Samples are available. Shipping is charged to you; sample arrangements and any sample charge are confirmed before dispatch.
Before ordering
What is the minimum order?
The displayed minimum order applies per design and colour. Include each reference and colour separately in your quantity list.
Can I request a custom colour?
Yes. Send a physical colour reference or the agreed colour standard. Approve the colour together with the selected trim and intended backing before bulk production.
How do I request the right sample?
Send the product reference, colour, intended placement and the fabric to be used. Allow enough length to sew the complete trial join or cuff. Sampling is typically 2–3 days, with timing and charges confirmed for your project; shipping is charged.













